Glass Polishing Comparison |

In this table, we have compared the glass polishing systems available on the Russian market

Based on the development of foreign analogues we have improved our Glass Gloss system and provided a comparative characteristic with other polishing systems

3M – polishing paste

100$ per 1000ml

100ml

from 4 hours and more
/
from 1500 and above

~ 10$

Mirka – polishing paste

17.21$ per 250ml

100ml

from 4 hours and more
/
from 1500 and above

~ 7$

Sonax Profiline Glass Polish – abrasive glass polishing paste

16.5$ per 250ml

100ml

from 4 hours and more
/
from 1500 and above

~ 6.51$

Cerium Oxide

10$ per 100gram

100gram

from 3 hours and more
/
from 2500 and above

~ 4.5$

GOI paste

Previously used for polishing, difficult to work with

-

Glass Gloss

44$ per 250ml

15-20ml

1 – 2 hours
/
600-800

~ 2.89$

Conclusion

All information about the systems in the table – average result per 1 windshield

All available products are not original. Everywhere the abrasive is cerium oxide plus fillers to obtain the paste state. Therefore, the cost of polishing one glass is approximately the same. However, it can be very difficult to achieve an acceptable result.

Reviews on the Internet for works with 3M, Sonax say that even after 3-4 hours of work, the result is not always clear. When working with the powder, the heating of the glass is so strong that even professional detailers do not dare to Polish the glass with chips.

When working with Glass Gloss paste, the heating is minimal. If there are chips, repair the glass before polishing. The cost of polishing glass is shown in the table. Minimum 200 RUB. for paste Glass Gloss, while the result of polishing is much better in comparison with competitors, and the time is less at times.

Polihim LLC, 111024, Moscow, ul. Staroobryadcheskaya, 28A, p. 1, of. 203, TIN 7704412892, OGRN 1177746478381